No, but we can build or get this type of foam.

Yes. We recommend water-based paints. Avoid coatings or solvents that are comprised of acids, esters, ethers, ketones, aromatic and aliphatic hydrocarbons as these chemicals will damage EPS foam. Test a small area for compatibility as incompatible coatings will damage EPS foam.

Yes. We recommend adhesives that are specified for foam (Liquid Nails LN-604 Interior Projects and Foamboard Adhesive), water-based contact adhesives (3M™ 30NF Green Fastbond Contact Adhesive), hot melt adhesives (low temperature hot glue sticks), select spray adhesives (3M™ Super 77™ Multipurpose Spray Adhesive), and MDI based adhesives (Gorilla Glue). Test a small area for compatibility as incompatible adhesives will damage EPS foam.

Shipping/Receiving hours of Monday-Friday 7:00 a.m. to 3:00 p.m. is preferred, if a time is needed after 3:00 p.m. please contact the office

Office hours are Monday-Friday 7:00 a.m. to 4:30 p.m.

#6 expanded polystyrene (EPS) only – hard packaging type foam

Clean off any tape or labels. We do not accept EPS foam that has been stored outside in the elements or dirty.

You may bring the foam to our office location at 1820 Chicago Dr. Grand Rapids MI 49519. Enter the employee entrance door (blue door) and the foam will be received there. Recycle hours are Monday-Friday 7:00 a.m. to 7:00 p.m.